Pages

Wednesday, January 21, 2015

MACHIUKA WIFI RADIO PROJECT pag.6

Part IV - PUT EVERYTHING IN PLACE

We've arrived at the finish line, i.e. to put everything together in the donor case of Salvaged Satellite Receiver (SSR).
The steps are:
  1. Put in place the WiFi radio hardware components
  2. Test the result, using the remote control
Put in place the WiFi radio hardware components.
Briefly, our inventory consist of:
  1. Salvaged Satellite Receiver
  2. Power supply of the SSR
  3. Front panel of the SSR
  4. MR3020 router with external antenna
  5. Arduino Pro Mini + ENC28J60 Ethernet Module+ Ethernet cable (the one provided with the router)
  6. Arduino Pro Mini + USB to serial breakout board
  7. USB hub with enough ports for all the stuff
  8. USB pendrive of minimum 4 GB
  9. Salvaged remote control
  10. USB powered speakers
  11. USB cables

My setup is presented in the picture below:

I know, it look a little messy, but forgive me, that's my first prototype. Maybe the second will be a good looking one.
The final result instead look very stylish ( I think).
Test the result, using the remote control.
The youtube video clip that I made show the final tests.
ENJOY YOUR STATE-OF-THE-ART WIFI RADIO !.

No comments:

Post a Comment